| Color: | Yellow / White / Brown |
|---|---|
| Lead Time: | 3 Days After Deposit |
| Sample: | Available |
| Visiting of Office: | Available |
| Inspection of Material Before Shipping: | Available |
| Transport Package: | 25KG/BOX |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Dyneon Fluoroelastomer
Dyneon FC 2211
Dyneon FC 2210
Dyneon FC 2230
Dyneon FC 2260
Dyneon FC 2261Q
Packing:25kg/box
Description:
Dyneon Fluoroelastomer FC 2211 is an ultra-low viscosity copolymer. This fluoroelastomer (FKM) offers greater flow and filler loadings compared to conventional high-viscosity fluoroelastomers. It is a raw gumstock and is curable using amine or bisphenol-type curing agents.
Dyneon Fluoroelastomer FC 2211 boasts numerous favorable attributes that make it suitable for use in transfer and injection molding, extrusion, calendering and coatings. It does not feature an incorporated curative, but is amine or bisphenol curable.
Dyneon fluoroelastomer FC 2211 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer (FKM) formulations.
Dyneon Fluoroelastomer FC 2210 is an ultra-low viscosity copolymer. This fluoroelastomer (FKM) is used in transfer and injection molding, extrusion, calendering and coatings. It does not feature an incorporated curative, but is curable with amine or bisphenol-type curing agents.
Dyneon Fluoroelastomer FC 2210 has a number of attributes that make it suitable for injection and transfer molding, extrusion, calendering and coatings. It can be blended into other fluoroelastomers to modify viscosity or act as a process aid. Dyneon fluoroelastomer FC 2210 can be incorporated into other FKM polymers using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer applications.
Dyneon Fluoroelastomer FC 2230 is a copolymer. This fluoroelastomer (FKM) is used for property modification and is suitable for compression molding, extrusion, calendering and coatings. It is a medium-viscosity raw gumstock that is curable with amine or bisphenol-type curing agents.
Dyneon Fluoroelastomer FC 2230 has a number of attributes that make it suitable for compression molding, extrusion, calendering and coatings. The raw gum can be used to adjust physical properties and processability, e.g. crosslink density and viscosity.
Dyneon fluoroelastomer FC 2230 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer (FKM) formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FC 2230 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.
Dyneon FC 2260 is a copolymer, plus cure site monomer. This fluoroelastomer offers improved water and steam resistance over conventional fluoroelastomers, and can be used in transfer molding, compression molding and calendering. It's also used in blends with fluorosilicone, silicone, EDPM and other peroxide-curable elastomers.
In addition to its improved water and steam resistance,Dyneon Fluoroelastomer FC 2260 can be used in blends with fluorosilicone, silicone, EDPM and other peroxide-curable elastomers. Additionally, Dyneon fluoroelastomer FC 2260 is capable of vulcanization of thick cross-section parts without fissuring.
Dyneon fluoroelastomer FC 2260 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer (FKM) formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FC 2260 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.
Dyneon Fluoroelastomer FC 2261Q is an intermediate-viscosity copolymer. This fluoroelastomer (FKM) is curable with amine or bisphenol-type cutting agents, and does not include an incorporated curative.
Dyneon FC 2261Q is an intermediate-viscosity raw gum used for increasing viscosity and green strength. This FKM can be used in compression molding, and is amine or bisphenol curable.
Dyneon fluoroelastomer FC 2261Q can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical FKM formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FC 2261Q should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.
We can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}