Udel P-1700 NT11 Natural
Udel P-1700 polysulfone (PSU) is a tough,rigid,high-strength thermoplastics suitable for continuous use up to 300°F (149°C). It is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization.
Udel P-1700 polysulfone is highly resistant to mineral acids, alkali and salt solutions. Resistance to detergents and hydrocarbon oils is good, but the resin may be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons.These resins are also highly resistant to degradation by gamma or electron beam radiation.
Electrical properties of Udel P-1700 polysulfones are stable over a wide temperature range and after immersion in water or exposure to high humidity.
The resins comply with FDA 21 CFR 177.1655 and may be used in articles intended for repeated use in contact with foods.
Udel PSU (polysulfone) is a rigid,high-strength,semi-tough,transparent plastic that offers higher heat resistance and better hydrolytic stability than polycarbonate.It retains its good mechanical properties when exposed to steam and other sterilization techniques.
HDT of 174 °C (345 °F)
Good practical toughness
Excellent hydrolytic stability
Hot water fittings
Membranes:Hemodialysis,Water treatment,Bioprocessing,Food and beverage,Gas separation.
We can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.